Cuts & Marks Roof Truss Components From 11″ to 20′ Long

The Servo-Omni is a dramatically enhanced version of its predecessor, Auto-Omni. It retains all of the robotic, machine-tool design mechanisms of Auto-Omni, but is now servo-controlled. The following description highlights the enhanced features and abilities of Servo-Omni as compared to Auto-Omni.

  • Set-up time is approximately 2 1/2 times faster than Auto-Omni - typically, 6 to 10 seconds per set-up average which translates to about 1 1/2 to 2 hours more cutting production per shift

  • Transport speed (adjusts for component length) is 162% faster

  • 18 servo control system - rapid, simultaneous movement of Transport (back & forth) and cutting heads (telescoping, elevating, and angle rotation)

  • Transport and cutting head movements are smooth, deliberate and extremely fast – speed is ramped up at the start, then ramped down as the called-for position is approached stopping "spot on" without position hunting

  • Set-up times are not affected when resistance (friction drag) changes – that is, as the system wears over time or if mechanisms are allowed to collect dust and debris

  • All new electronics using Koskovich-designed & proven electronic technology – extremely reliable, solid-state circuit cards plug in & out

  • Encoders, which provide cutting head and Transport position information to the servo systems, are now ultra-high resolution –– capable of registering 8000 measurement points within each revolution of a drive mechanism

  • Reference to earth for determining precise cutting head angles is now provided by sealed Absolute-Angle Inclinometers

  • New Windows XP Professional® operating software and Windows®-based operator interface (now in English and Spanish)

  • New high-speed communications bus (PC to saw)

  • Less susceptible to outside voltage and electronic "noise"

  • Calibration is still rarely required and now much easier to accomplish

  • Real time production reporting –– available at the operator computer console and/or remotely via computer network

  • Descriptive diagnostic messages instead of look-up codes

  • Software & firmware upgrades available via Internet from computer console – can also email-communicate with The Koskovich Company directly from saw

  • Same footprint and electrical supply requirements as Auto-Omni

    Upgradeable:  New Servo-Omni is designed such that all options can be field installed and, also, with the intent that all future enhancements can be field installed.

Installer Downloads