Auto RollTM Finish Press
Physical Data
  • 245" L x 105" W x 90" H (6.2 m x 2.7 m x 2.28 m)
  • Pressing height adjustment between rollers: 1-3/16" to 8" (3.02 cm to 20.32 cm)
  • Weight: Approx. 15,000 lb
  • Size of pressing rollers: 24" (609.6 cm)
  • Roller wall thickness: 1" (25.4 mm)
  • Baffles per roller: 4
  • Shaft diameter: 4"
  • Bearing size: 3-7/16"
  • Chain drive: #80

Performance Data

  • 100% plate embedment
  • Direction of roller rotation: Forward and reverse
  • Speed of travel: 119 ft per minute (6 m/sec)
  • Lumber capacity:
    Maximum board thickness = approx. 7"
    Maximum width (truss height) = 16' (48 cm)
    Maximum length of board or truss = unlimited (dependent on plant configuration)
  • 2 drive motors (1 for each 24-in. roller): 5 hp
  • 1 height adjustment motor: 1 hp

    Features

    • Auto Mode allows integrated equipment to send height signal to Auto Roll for automatic height adjustment
    • Electrical allowances made for interlocking with stackers and conveyors
    • Manual Mode allows manual operation at any time
    • Beacon and horn alerts personnel of operation status
    • Infeed/outfeed roller on each side guides truss
    Electrical Data
    • Voltage: 400 VAC, 50 Hz, 3-phase 
    • FLA plus control amps: 18.7 amperes
    • Equipment disconnect protection: 25 amps
    • CE certified available
    • All electrical panels are UL Listed

    Safety Data

    • Pushbars
    • Bilingual or ISO safety labels
    • Work place noise level (Work Cycle): 69.6 dB
    • Difference between background noise and normal operation: 17.9 dB
    Options
    • Choise of CE certified or ANSI/OSHA compliant
     
    Machine specifications subject to change without notice

     This page last modified on 2/24/2010