Bracing Products
Angle Brace

0.85mm G300 Z275 Galvanised Steel
Angle Brace may be used as either compression or tension brace.
Nail holes are fully punched for ease of nailing.
Fix with 60mm x 3.15mm diameter nails.
When used as a diagonal wall brace, it should be secured at each end with three nails, and two nails at each stud crossing.
Standard length is 3.6m, other sizes available on request (2.7m - 5.0m).
Angle Brace can be used as an anti-sag mechanism for purlins or girts.