Tekset Jigging Specifications

MiTek’s versatile Tekset™ jigging hardware can reduce setup times dramatically.  When using the Tekset hardware with MiTek’s slotted-top tables, true savings can be realized immediately.  Add the technologically advanced Virtek® TrussLine® laser projection system, and setup delays become a thing of the past. Tekset hardware is the highest quality and most durable jigging available. Each system comes with a standard stop set and either a standard slotted fixture set or a laser jigging fixture set.

Standard Stop Set
For 3/4" Table Tops - #010100
  • 50 pucks, black
  • 50 pucks, gold
  • 70 standard T-nuts
  • 70 rotary T-nuts
  • 120 bolts, laser target or standard
  • 4 wrenches
Standard Slotted Fixture Set
For 3/4" Table Tops - #010110
For 1/2" Table Tops - #010116
  • 14 plate targets
  • 2 straight 12” stops
  • 2 straight 18” stops
  • 1 straight 24” stop
  • 2 heel stops, 18" 
  • 2 heel stops, 12" 
  • 1 T-stop, 12”
  • 2 T-stops, 18”
  • 1 T-stop, 24”
  • 24 rotary T-bolts
  • 40 flange nuts
Standard PLANXTM Fixture Set
For 3/4" Table Tops Only - #010191
  • 6 plate targets
  • 1 straight 18” stop
  • 1 heel stop, 24"
  • 1 heel stop, 18" 
  • 1 heel stop, 12" 
  • 1 T-stop, 18”
  • 12 rotary T-bolts
  • 20 flange nuts
  • 3 wrenches
Standard PLANXTM Supplemental Set
For PLANX with Supplemtal Slot or Blank Slot - #010165
  • 10 pucks, black 
  • 10 rotary T-bolts
  • 10 bolts, laser target  
     
Replacement Kits
  • For Standard Slotted Fixture Set and Standard Stop Set - #010162
  • For Laser Jigging Fixture Set and Standard Stop Set - #010155
Laser Jigging Fixture Set
For 3/4" Table Tops - #010130
For 1/2" Table Tops - #010153
  • 14 plate targets
  • 2 straight 12” stops
  • 2 straight 18” stops
  • 1 straight 24” stop
  • 2 heel stops, 18" 
  • 2 heel stops, 12" 
  • 1 T-stop, 12”
  • 2 T-stops, 18”
  • 1 T-stop, 24”
  • 24 rotary T-bolts
  • 40 flange nuts
  • 3 wrenches
Laser PLANXTM Fixture Set
For 3/4" Table Tops Only - #010192
  • 6 plate targets
  • 1 straight 18” stop
  • 1 heel stop, 24"
  • 1 heel stop, 18" 
  • 1 heel stop, 12" 
  • 1 T-stop, 18”
  • 12 rotary T-bolts
  • 20 flange nuts
  • 3 wrenches
 
 
 
 
 
 
Machine specifications subject to change without notice.

 This page last modified on 7/25/2008