SmartSet® Specifications

Physical Data

  • Overall width: 15’ 1” (fully assembled)
  • Overall height: 9’ 1” w/hoods
  • Overall saw length: 32’ (w/o incline conveyor)
  • Overall saw length: 43’ (w/incline conveyor)
  • Shipping weight: 18,000 lb (approx.)
  • #1 Saw: 7 hp, 3,600 rpm with 20” carbide tip blade (+15º through -90º)
  • #2 Saw: 7 hp, 3,600 rpm with 16” carbide tip blade (-15º through +90º)
  • #3 Saw: 7 hp, 3,600 rpm with 16” carbide tip blade (-15º through +90º)
  • #4 Saw: 7 hp, 3,600 rpm with 20” carbide tip blade (+15º through –90º)
  • #5 Saw: 13 hp, 1,800 rpm with 32” carbide tip blade (-15º through +90º)
Performance Data

Manual Mode:

  • Min. straight cut length: 11”
  • Min. cut w/four 45º cuts: 16”

Semiauto Mode (SmartSet Pro only):

  • Min. straight cut length: 13”
  • Min. cut w/ four 45º cuts: 18”

Performance Data For Both Modes:

  • Max. lumber size: 2x12
  • Max. straight cut length: 20’ 0”
  • Max. scarf cut length w/32” blade: 29-1/2”
  • Max. scarf cut length w/20” blade: 16”
  • Max. scarf cut length w/16” blade: 10-1/2”

Features: SmartSet

  • Rugged proximity switches provide position feedback
  • Illuminated LCD readouts on angulation and centerline
  • Manual setup with toggle switches 

Features: SmartSet Pro

  • Industrial-strength color LCD touch screen
  • 2-speed angulation drives for fast, accurate setup
  • Indicating fuse holders for quick identification of faulty fuses  
  • Rugged proximity switches provide position feedback
  • On-board diagnostics and “help” screens for determining and clearing fault conditions
  • Advanced programmable logic controller software designed to provide the most reliable, accurate, and fastest semi-automatic saw available
  • Quick out-of-cut feature speeds up transitions from in- and out-of-cut, and back
  • Allows for manual or semiautomatic setup
Electrical Data
  • All electrical panels are UL Listed
  • Voltages not listed require transformer

SmartSet Saw:

  • Voltage:  230 VAC
  • FLA plus control amps: 152.2 amps
  • Equipment disconnect protection: 150 amps

SmartSet Pro Saw:

  • Voltage:  230 VAC  
  • FLA plus control amps: 152.1
  • Equipment disconnect protection:150 amps
Safety Data
  • Pneumatic brakes on blades
  • Emergency stop
  • Perimeter mounted shutdown cable
  • Bilingual safety labels
Options
  • 4-and 6-blade models available
  • #6 saw: 13 hp, 1,800 rpm with 32” carbide tip blade and powered centerline and angle adjustment
  • 12’ incline waste conveyor mounted at either end
  • Various material handling options
 Note: For single-piece bottom chords, with a pitch less than 4/12, on lumber larger than 2x4 - Blade #6 is required.
 Machine specifications subject to change without notice.

 

 This page last modified on 9/14/2007