JackRabbit®  Specifications  

Physical Data
  • Motor rating and speed: 15 hp at 1,800 rpm
  • Weight: 3,250 lbs
  • Approximate dimensions: 6’ 0” width; 7' 2”  height; 7’ 6” depth
  • Cycle time: 2 seconds
  • Throat depth: 10” (from plate cut-off)
  • Operating pressure: 1,500 psi
  • Acceptable production material: Hardwoods, softwoods, plywood, OSB, and high-density plastics with thickness of 3/4” to 1-5/8”
  • Reservoir: 38 gallons
  • Hydraulic fluid: 150-225 SUS (customer must supply hydraulic fluid)
Features
  • Touch screen setup
  • Easy jigging
  • Grooved and painted jig guidelines on table
  • Slotted table with jig setup
  • Patented automatic plate advance/shear
  • High-quality hydraulics
  • Heavy-duty gear drive
  • Coil-fed plates on press head

Coil Nail Specifications

Cut Plate:
  • Plate width: 1.0", 1.5", 2.0", 3.0"
  • Plate length: 2”, 3”, 4”, 5”, and 6”
Coil:
  • Coil plate thickness: 20-gauge
  • Coil width: 1.0”, 1.5”, 2.0”, 3.0”
  • Coil length: 183’, 175’, 175’, 132’
  • Weight: 25.4 lb, 36.6 lb, 48.8 lb, 56.0 lb
  • Coils per Pallet: 24, 16, 12, 8
  • Weight: 609 lb, 585 lb, 585 lb, 448 lb

Electrical

  • Voltage: 208/230/460 VAC
  • FLA plus control amps: 44.7/44.7/21.8 amps
  • Equipment disconnect protection: 60/60/30 amps
  • All electrical panels are UL Listed

Safety Features

  • 2-hand photoelectric touch control
  • End-of-coil stop
  • Emergency stop
  • Bilingual safety labels
 
Machine specifications subject to change without notice.

     This page last modified on 10/15/2007