Cyber Saw
Cyber-Saw™
 

Physical Data

*Overall width: 13'-4
*Overall height: 6'-7"
*Overall saw length without Incline Scrap conveyor: 32'-0"
*Overall saw length with Incline Scrap conveyor: 44'
*Shipping weight: 16,000 lbs. (approx.)
*Electrical service required: 220 volts, 125 amps
*Five saws:

(#1) Saw - 5 hp, 3450 rpm with 20" 
carbide tip blade (+15 through -90)

(#2) Saw - 5 hp, 3450 rpm with 16" 
carbide tip blade (-15 through +90)

(#3) Saw - 5 hp, 3450 rpm with 16" 
carbid tip blade (-15 through +90)

(#4) Saw - 5 hp, 3450 rpm with 20" 
carbide tip blade (+15 through -90)

#5) Saw - 10 hp, 1725 rpm with 32" 
carbide tip blade (-15 through +90)


Performance Data

*Maximum lumber size 2 x 12
*Maximum straight cut length: 20'-0"
*Minumum straight cut length: 18"
*Minimum cut with four 45: 24"
*Maximum scarf cut length with 32" blade: 29-1/2"
*Maximum scarf cut length with 16" blade: 10-1/2"

*Maximum scarf cut length with 20" blade: 16"


Safety Data

*Pneumatic brakes on all five saws
*Master operator shut-off control
*Perimeter mounted shut down cable
*Fully shrouded protective guards and shields

Options

*(#6) Saw - 10 hp, 1725 rm with 32" carbide tip blade
*12'-0" long Incline Scrap Conveyor mounted at either end

Other Information

*Powered centerline adjustment for each of the five saws

* Powered angulation on all five saws

*Powered carriage travel

*Powered hold down adjustment, both vertical and horizontal

*Powered horizontal adjustment of infeed conveyors

*Powered lateral adjustment for in- and out-of-cut on (#5) Saw

*Powered vertical adjustment for out-of-cut one (#1), (#2), (#3), and (#4) Saws

*24" wide full length scrap conveyor belt powered by 1 hp gear motor

*Electronic Lumber Counter

*Heavy-duty 2120 Feed Chains with Pusher Lugs

*Micro-adjustable Feed Chain sprocket for synchronizing Pushers

*Rack and pinion micro-adjustable Lumber Stop

*Center Support Bar

*Right-handed Scarfing Skid Bar

*Tru-cut Tracking Blade