Stand-Alone Conveyor Specifications

Features

  • Conveyor system designed to integrate with the MiTek® Finish Roller and all MiTek® stackers
  • Stackers communicate with Stand-Alone Conveyors to coordinate when rollers should turn on and off
  • Conveyor rollers are located 5 ft on center from each other
  • Can be placed closer together for use with small trusses
  • Every other roller is powered with a 1/2-hp drive motor

Electrical Data

  • Voltage: 220/380/440 VAC
  • FLA plus control amps: 2.4/2.2/1.1 amps per motor
  • Phases: 3
  • Cycles: 60 Hz

Safety Data

  • Emergency stop
  • Guarding provided for a V-belt drive system
  • Bilingual safety labels

Options

  • Conveyor rollers available in 3 ft, 4 ft, and 6 ft lengths
  • Can purchase conveyor system for interior or exterior use
  • Can purchase conveyor system without powered motors
 
Machine specifications subject to change without notice.

 This page last modified on 10/15/2007