RoofTracker RST Specifications

Physical Data of Tables

  • Dependent on table type

Physical Data of Gantry Head

  • Gantry head: Length: 16’ 6”; Width: 10’ 1”
  • Roller height adjustment: 6”
  • Roller diameter: 24” nominal (outside)
  • Roller wall thickness: 3/4” nominal
  • Baffles per roller: 4
  • Throat opening: 14’ 11-1/2” wide
  • Shaft diameter: 4”
  • Bearing size: 3-7/16”
  • Weight of gantry: approx. 12,000 lb
  • Wheels: 6 pressure wheels, 4 drive wheels, 4 idler wheels, 8 guide wheels
  • Operator platform on gantry head
Performance Data
  • Speed (press capacity): 110 ft per minute, max.
  • Controls: Joystick
  • Ejection system:side-eject is standard, auto-eject and end-eject are optional 
  • Finish Roller required
  • Direction: Forward/reverse
  • Brake: Electrical magnetic disc (industrial)
  • Chain drive: #80
  • Horsepower rating: 10 hp
  • Motor speed: 1735 rpm

Electrical Data

  • Voltage: 208/230/460/575 VAC, 60 Hz, 3-phase  
  • FLA plus control amps: 23.3/12.9 amps
  • Equipment disconnect protection: 50/50/25/20 amps 
  • Electrical system uses overhead bus bar or festoon cable
  • All electrical panels are UL Listed

Gear Box Data

  • Ratio: 43:1
  • Input rpm: 1735
  • Output rpm: 40
  • Maximum hp: 10
  • Torque: 15,762 in-lbs

Safety Data

  • 2-beam light bars
  • Patented bumpers on corners of gantry stop motion when depressed
  • Emergency stop controls
  • Industrial brake for rapid stopping
  • Brake monitor to monitor brake life
  • Bilingual safety labels

Options

  • Top-chord platform
  • Dual operator stations
  • Pendant option

Machine specifications subject to change without notice.

 

 This page last modified on 4/19/2010