Jack Table Specifications

Physical Data

  • Overall width: 6’
  • Length: 20’, 24’, 30’ 
  • HPU reservoir: 7 gallons
  • Hydraulic fluid: 60-245 SUS, ISO 32 (customer must supply hydraulic fluid)
  • HPU motor size: 7-1/2 hp
  • Horizontal travel motor: Hydraulic motor
  • Platen: 74" x 12" (66-1/2" x 12" can press plates)
  • Table top: 1" plastic on top of 3/4" plywood. See Options for additional table tops.

Performance Data

  • Max truss height: 5' 6"
  • Max truss length: Length of table
  • Can press plates into 2x, 3x, or 4x dimensional lumber less than 12" wide
  • Pressing capacity: 30 tons or 50 tons
  • Operating pressure for pressing 2,550 psi
  • Operating pressure for horizontal travel motor torque: 750 psi 

Features

  • Operator controls for horizontal travel: Joystick
  • Operator controls for pressing: Optical touch buttons (2-hand controls)
  • Auto-raise/disable switch to enable parking the platen in the down position extends the usefulness of hydraulic components 
  • Festooning under the table
  • Easy installation - from truck to trusses in a couple of hours
  • Indicator light shows when filter element should be replaced
  • Platen blocking for 2x dimensional lumber is supplied
  • Shutoff bull valve for pump servicing
  • Adjustable platen opening

Electrical Data

  • All electrical panels are UL Listed

Voltage
208 VAC 
230 VAC  
380 VAC  
415 VAC  
460 VAC 
575 VAC 
Cycles
60 Hz
60 Hz
50 Hz
50 Hz
60 Hz
60 Hz
FLA plus control amps
22.2 amps
20.1 amps
12.6 amps
11.4 amps
10 amps
8.1 amps
Equipment disconnect protection 
20 amps
20 amps
12 amps
10 amps
10 amps
8 amps

Safety Data
  • Emergency stop
  • Bilingual safety labels
  • Optical touch controls to ensure 2-handed operation

Options

  • Other table tops available
  • Optional U-channels 18" on center
    •   Also available 8" or 12" on center 
  • Jigging for U-channels 
  • Dual operator control
  • Heater for hydraulic reservoir (recommended in cold environments)
  • Platen blocking for 3x and 4x dimensional lumber
 
 
Machine specifications subject to change without notice.

 This page last modified on 8/26/2008