MiTek Presses Overview
Little Boy light C-press - 20 t

 

 
Maximum power 20 t.
Maximum pressure 16 Mpa.
Pressing plate 160 x 260 mm.
Rotation angle of presshead 355°.
Magnetic bottom opposite - plate.

 

Maximum length of working area 18 m

Maximum width of working area  4,5 m

Little Boy
 
 
Maximum power 50 t.

Pressing plate 630 x 350 mm.

Speed of portal 25-40m/min

Steel floor with magnetic press tables

 

 

Maximum length of working area 15 m or 30 m

Maximum width of working area  5 m

 

 

Mark3

Mark 1  Table press 25 t

 

Maximum power 25 t.
One press head per portal.
Electrical power consumption 17 Kw.

Pressing plate 500 x 700 mm.

Speed of portal 25-40m/min
Single block table 4507mm x 1930mm
(Single tables to be added in a row)
Optional manual or NC controlled.
Optional WIFI connection to network.
Optional ejectors.
Optional wodden table top.

 

 

Typical length of press table row 30 m

Maximum width of press table 4,5 m

 

Mark 1

Mark 2  Table press 60 t

 

Maximum power 60 t.
One press bar over full table width.
Electrical power consumptiopn 13 KW
Speed of portal ~ 36m/min
Table width optional 2m ; 2,5m; 3,20m
Optional manual or NC controlled.
Optional WIFI connection to network.
Optional ejectors.
 

 

Typical length of press table row 15 - 50m 

Maximum width of press table 3,20 m

 

Mark 2

Roof Glider - Roller Press

 

Heavy duty high capacity press
Roller portal electrical driven
Table width 4,5 m
Ejectors integrated into table
Steel tables
Finish roller recommended
 

 

Typical length of press table row 10 - 40m 

Maximum width of press table 4,50 m
 

Roof Glider

Rabbit Press 

 

Press power 60t
Steel floor with magnetic press tables
Portal speed up to 30m/min
Finish Roller mandatory
Crane recommended
Stacker recommended
 

 

Maximum length of press area +30m

Maximum width of press table 4,50 m
 

Rabbit press

Hydra Press 

 

High speed, heavy duty press for extremely flexible production runs.
13 independent press heads.
Fully CNC controlled positioning of press heads.
Set up time extremly short.
Assembly circle below 1 minute/truss.
Connector plate clips integrated in press head.
Automated plate positioning.
Interface to 20/20 software.
Crane and stacking system recommended.
 

Rabbit press
Floor Trusses
RFT 2,1 roller press

 

Heavy duty roller press for connector plate floor trusses.
Operation form both sides of the table.
Max. truss length  14m.
Max. truss height  550mm.
Max. truss width   180mm. 
Timber clamping and flip mechanism.
Parking position at each end.
Electrical power consumption 8 Kw
 
RTF 2,1
Floor Trusses
Revolution - Posi Joist Press

 

High speed floor truss press.
Up to 200 m/h Posi Joist floor trusses.
Maximum length of truss 11m.
Cambered trusses.
Driven by 20/20 software.
Electrical power consumption 19,5 KW (47A).
Air preassure 6 bar for 8m³/h.
 
 
 
 
Revolution Press